您现在的位置:首页 > 技术文章 > 高洁净卫生级减压阀操作指南

高洁净卫生级减压阀操作指南

  • 发布日期:2019-02-28      浏览次数:1326
    • 高洁净卫生级减压阀操作指南我们本公司生产的,卫生级减压阀,保证了阀门内腔及表面的卫生要求,同时两端采用卡盘快装连接方式,便于阀门的拆卸和清洗;另外此款减压阀出厂标配隔膜压力表,可对阀门出口端的管道实际压力值的减压要求进行调试和监测
      卫生级减压阀多用于食品,制药,乳品,洁净室,生物工程等高洁净领域。
      阀门规格:DN15-DN50mm(1/2"-2")
      接口方式:快装卡箍,活结螺纹,对焊焊接,法兰。
      阀体材质:不锈钢304,316L
      高洁净卫生级减压阀操作指南
      By adjusting the hand wheel to reduce the inlet pressure to a desired outlet pressure, and rely on the energy of the media itself, so that the outlet pressure automatically maintain a stable valve. That is, by changing the throttle area, the flow rate and fluid kinetic energy change, resulting in different pressure loss, so as to achieve the purpose of decompression. Then rely on the control and regulation of the system adjustment, the valve pressure fluctuations and spring balance, the valve pressure in a certain range of error remains constant.
      Our company, the hygienic pressure reducing valve, to ensure the valve cavity and the surface of the health requirements, at the same time both ends of the chuck fast connection, easy to disassemble and clean the valve; In addition, this valve factory standard Diaphragm pressure gauge, the valve outlet side of the pipeline can be the actual pressure value of the decompression requirements for debugging and monitoring
      Sanitary valves are mostly used in food, pharmaceutical, dairy, clean room, bio-engineering and other high-clean areas.
      Valve Specifications: DN15-DN50mm (1/2 "-2")
      Interface: quick clamp, live knot thread, butt welding, flange.
      Body material: stainless steel 304,316L
      适用介质:蒸汽,压缩空气,水等,其他介质需定制。
      阀门使用参数: 进口端大压力1.0MPA(10公斤)
      出口端调压范围:0.08~0.8MPA(0.8~8公斤);
      工作温度:165°, 建议进出口压差2公斤以上

      高洁净卫生级减压阀操作指南特点:

      *平衡式减压结构,提高输出压力稳定性。
      *防松螺母可以控制调节螺杆的设定。
      *温度范围:-15-165℃,重量:7KG,大流量:15m3/h
      *零部件按HG20202要求清洗,阀体内外表面镜面抛光处理,满足GMP洁净要求,适合纯氧高洁净环境下使用。
      *99%通过工厂测试。


      材料:
      阀体---------不锈钢
      阀盖---------不锈钢
      密封元件---------FKM,PTFE
      弹簧---------不锈钢
      波纹管---------不锈钢
      法兰及法兰接头----------不锈钢
      紧固件-------不锈钢

      高洁净卫生级减压阀操作指南

      阀体采用不锈钢304/316L材质锻造,阀门各个部件均由高精度数控设备加工,阀体内部采用精密抛光处理,保证了阀门的高洁净要求,外表面有多重处理方法:镜面,亚光,喷砂等,满足各种工况需求。是通过调节,将进口压力减至某一需要的出口压力,并依靠介质本身的能量,使出口压力自动保持稳定的阀门。即通过改变节流面积,使流速及流体的动能改变,造成不同的压力损失,从而达到减压的目的。然后依靠控制与调节系统的调节,使阀后压力的波动与弹簧力相平衡,使阀后压力在一定的误差范围内保持恒定。